Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread:
[Guide] How to Install 5.00 m33-6 and more using Hellcats Recovery Flasher

  1. #1
    Founding Member LiNkZoR's Avatar
    Join Date
    Mar 2011
    Location
    Middle of nowhere
    Posts
    1,209
    Thanked: 271
    Mentioned
    3 Post(s)

    [Guide] How to Install 5.00 m33-6 and more using Hellcats Recovery Flasher

    Before we begin, there are a few pointers I would like to give.

    DO NOT SCREW WITH YOUR FLASH'S, MORE THAN LIKELY THERE IS A PLUGIN FOR THAT! I WILL GIVE YOU MOST OF THE STUFF YOU WILL HAVE TO DO WITH YOUR

    FLASH'S, DON'T DO ANYMORE UNLESS ITS UNDER GOOD JUDGEMENT BY YOU!

    WE ARE NOT RESPONSIBLE IF YOU BRICK YOUR PSP, PLEASE READ ALL WARNING

    THIS GUIDE IS FOR PSP'S WITH A HACKABLE MOTHER BOARD. IF YOU DO NOT HAVE ONE, PLEASE LEAVE I DON'T WANT YOU TO BLAME ME FOR BRICKING YOU.

    DO NOT QUOTE THE ENTIRE GUIDE IN YOUR REPLY, I WILL IGNORE IT AND ASK SOMEONE TO REMOVE IT!

    DO NOT MESS WITH FLASH 0,1,2,3, UNLESS YOU KNOW WHAT YOU ARE DOING!

    WE ARE PERMANATELY MODIFYING YOUR PSP, THERE IS A SLIM CHANCE YOU MAY BRICK PLEASE READ THIS AND UNDERSTAND THIS ONE LINE!

    THERE IS A SIGNED VERSION OF Hellcats Recovery Flasher, I HAVE NOT TESTED IT AND I HAVE NO REASON TO, I MAY LATER. IF YOU FIND THIS VERSION, BE

    PREPARED FOR THE WORST!

    I HAVE TESTED THIS THE WAY I INSTRUCT YOU TWO FOUR TIMES. I DID NOT BRICK ON ANY PROCESS!

    What you need



    What Hellcat's recovery flasher can do for you!


    Applying the CFW


    Good Apps to have


    Changing the version.txt to prevent accidental updates.



    A few things to do in Recovery Menu


    Thanks To


    Check out my other guide on How to install the POPSloader plugin!
    I probably forgot some stuff. If i remember Ill add later.
    Last edited by LiNkZoR; 09-30-2011 at 01:46 PM.


  2. The Following 3 Users Say Thank You to LiNkZoR For This Useful Post:


  3. #2
    Founding Member peire's Avatar
    Join Date
    Mar 2011
    Location
    england,liverpool
    Posts
    2,132
    Thanked: 588
    Blog Entries
    3
    Mentioned
    2 Post(s)
    great guide mate i will be useing this part "Changing the version.txt to prevent accidental updates." im on 5.00m33-6 prom 4 now so thats the only bit i will need to do for extra brick protection.

  4. #3
    Founding Member peire's Avatar
    Join Date
    Mar 2011
    Location
    england,liverpool
    Posts
    2,132
    Thanked: 588
    Blog Entries
    3
    Mentioned
    2 Post(s)
    will this guide do for a psp go on 6.39 firmware

  5. #4
    Founding Member LiNkZoR's Avatar
    Join Date
    Mar 2011
    Location
    Middle of nowhere
    Posts
    1,209
    Thanked: 271
    Mentioned
    3 Post(s)
    Does it have a hackable motherboard? then yes. If not, no it will brick. You have to use a HEN then.


  6. #5
    Founding Member peire's Avatar
    Join Date
    Mar 2011
    Location
    england,liverpool
    Posts
    2,132
    Thanked: 588
    Blog Entries
    3
    Mentioned
    2 Post(s)
    how do i check if the motherboard is hackable ?

  7. #6
    Founding Member LiNkZoR's Avatar
    Join Date
    Mar 2011
    Location
    Middle of nowhere
    Posts
    1,209
    Thanked: 271
    Mentioned
    3 Post(s)
    wait, no it won't i skipped over the psp go part. You can't use this or you will brick on it.


  8. #7
    Founding Member peire's Avatar
    Join Date
    Mar 2011
    Location
    england,liverpool
    Posts
    2,132
    Thanked: 588
    Blog Entries
    3
    Mentioned
    2 Post(s)
    lol, ok np any info to do it ?

  9. #8
    Founding Member LiNkZoR's Avatar
    Join Date
    Mar 2011
    Location
    Middle of nowhere
    Posts
    1,209
    Thanked: 271
    Mentioned
    3 Post(s)
    I went to WhiteShadow's guide and pulled this bit from it
    You CANuse:
    Total_Noob's HEN (6.20 TN-E, 6.39 TN-A)
    Total_Noob's HEN Xtended [by ardi] (6.20, 6.39)
    PRO HEN (6.20, 6.35, 6.39)
    6.39 ME (ONLYthe lcfw version, NOT the cfw version)
    I suggest you just go to his guide and pick which one you want
    http://www.hacksden.com/showthread.p...PSP-6.xx-Guide


  10. #9
    Founding Member namyarb3's Avatar
    Join Date
    Mar 2011
    Location
    Spokane, WA
    Posts
    648
    Thanked: 181
    Mentioned
    0 Post(s)
    K. I'm really dumb, right?
    I need a little clarification for my sanity, here.
    'things needed'- a usb cable and a charger. The charger I think I understand. To keep the thing charged during this process. The usb cable though. Am I transfering files from my laptop straight to the psp?
    I really don't wanna brick my buddies psp...I'm trying to be sure. I'm certain that this is easier than I'm making it out to be...

  11. #10
    HacksDen Staff
    Moderator
    RobGee789's Avatar
    Join Date
    Mar 2011
    Posts
    4,703
    Thanked: 1660
    Mentioned
    12 Post(s)
    what psp is it mate you might not have to downgrade im running 6.60me and it works perfect for me mate
    Need any gfx making HERE is where to ask

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •