Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread:
cant see xell {falcon console with mtx v2 (rgh2.0)}

  1. #1
    New User
    Join Date
    Aug 2012
    Posts
    0
    Thanked: 0
    Mentioned
    0 Post(s)

    Unhappy cant see xell {falcon console with mtx v2 (rgh2.0)}

    hello to everyone.

    i want to rgh2.0 my falcon xbox with 14719 dashboard.

    i create ecc with (360_Multi_Builder_v0.95a) and write it to console.

    i connect matrix glitcher v2 to my console and turn on the console but xell doesnt boot and one blue led on matrix v2 is blinking.

  2. #2
    HacksDen Staff
    Administrator
    Krafter's Avatar
    Join Date
    Mar 2011
    Location
    Where you're not
    Posts
    2,909
    Thanked: 764
    Blog Entries
    1
    Mentioned
    5 Post(s)
    Hello and welcome to HacksDen.

    Before we can help you, you should post clear images of your install. Problems like this can be caused by soldering issues, wire routing, etc.. images will show those types of problems.

    You should also keep in mind that Falcons are a pain in the ass to glitch on RGH2. You might also think about using J-Runner instead of 360_multi_builder. It's everything you need in one app.


    I hate TapaTalk auto correction. Please bare with me.
    Judge me by the content of my character and not the color of my politics.
    Feedback from my work: 1, 2, 3, 4

  3. The Following User Says Thank You to Krafter For This Useful Post:


  4. #3
    New User
    Join Date
    Aug 2012
    Posts
    0
    Thanked: 0
    Mentioned
    0 Post(s)
    ok as soon as possible i take photo
    thanks for answer

  5. #4
    Enthusiast dgenx's Avatar
    Join Date
    Feb 2012
    Location
    south coast uk
    Posts
    441
    Thanked: 155
    Mentioned
    0 Post(s)
    i agree with krafter falcons are a pain,and j-runner is prob the best app to use for all your rgh needs.

    you may need to try diff timming files for rgh 2.

    i think rgh2 is pants tbh.but thats my view...

  6. The Following 2 Users Say Thank You to dgenx For This Useful Post:


  7. #5
    Senior Member cj_goalie31's Avatar
    Join Date
    Feb 2012
    Posts
    220
    Thanked: 29
    Mentioned
    0 Post(s)
    Quote Originally Posted by dgenx View Post
    i agree with krafter falcons are a pain,and j-runner is prob the best app to use for all your rgh needs.

    you may need to try diff timming files for rgh 2.

    i think rgh2 is pants tbh.but thats my view...
    Ya RGH 2 on a phat is hard but this thread has a lot of information. You may want to browse around and try some things out. But still good to post pics to rule out the obvious. For me the lmr-100a (you can use rg-174 also) sheilded cable at about 12" worked the best.

    http://www.team-xecuter.com/forums/s...hlight=headway

  8. The Following User Says Thank You to cj_goalie31 For This Useful Post:


  9. #6
    New User
    Join Date
    Aug 2012
    Posts
    0
    Thanked: 0
    Mentioned
    0 Post(s)

  10. #7
    Junior Member
    Xbox Junkie!
    knowlzy10's Avatar
    Join Date
    Feb 2012
    Location
    workington, cumbria, england
    Posts
    585
    Thanked: 298
    Blog Entries
    1
    Mentioned
    0 Post(s)
    not been funny but i struggle to read persian, even with google translate. i have no idea how to view them pictures, can you not just upload them from your pc to the forum as an attachment?





  11. #8
    Enthusiast dgenx's Avatar
    Join Date
    Feb 2012
    Location
    south coast uk
    Posts
    441
    Thanked: 155
    Mentioned
    0 Post(s)
    your images aint that clear,is there any chance you can post in focus ones

    but from what i can make out,your solderin needs to be looked at.it's a bit ruff.. you may have some bridged points...


  12. The Following User Says Thank You to dgenx For This Useful Post:


  13. #9
    Junior Member
    Xbox Junkie!
    knowlzy10's Avatar
    Join Date
    Feb 2012
    Location
    workington, cumbria, england
    Posts
    585
    Thanked: 298
    Blog Entries
    1
    Mentioned
    0 Post(s)
    how did u get them been learning a new language well can make sod all out from that image thnx dgenx, apart from the stby_clk don't look to clever, need in focus pictures of all the points you have soldered to if to assist you further





  14. The Following User Says Thank You to knowlzy10 For This Useful Post:


  15. #10
    Enthusiast dgenx's Avatar
    Join Date
    Feb 2012
    Location
    south coast uk
    Posts
    441
    Thanked: 155
    Mentioned
    0 Post(s)
    Quote Originally Posted by knowlzy10 View Post
    how did u get them been learning a new language well can make sod all out from that image thnx dgenx, apart from the stby_clk don't look to clever, need in focus pictures of all the points you have soldered to if to assist you further
    always good to learn new things

  16. The Following User Says Thank You to dgenx For This Useful Post:


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •